Description

Daracem® 133 is a ready-to-use aqueous solution of a modified naphthalene sulfonate. Daracem 133 is a high range water reducer, commonly referred to as a superplasticiser. It is a low viscosity liquid, which has been formulated by the manufacturer for use as received. Daracem133 contains no added chloride. Daracem 133 meets ASTM C 494/C 494M Type F water-reducing, high-range admixture.

---

Product Advantages :

• Compatible with a wide range of cements.
• Produce high slump flowable concrete at no loss in strengths
• Produce low water-cement ratio concrete and therefore, high strengths
• Aids in rapid discharge of concrete from truck mixers thereby reducing on-the-job time and improving mixer utilisation.

Description

ADVA® 616 is a high performance, new generation high-range water reducer based on comb polymer. It is a ready-to-use liquid admixture with superior dispersing capacity for the cement particles in the concrete mix.This capability exceeds that of normal water-reducing admixtures, resulting in lower dosages and better control technology ADVA 616 contains no added chloride. One litre weighs approximately 1.07kg ± 0.03kg.ADVA 616 complies with the requirements of admixture specifications: SS:EN 934-2. Excellent slump control and slump retention are necessary properties of any high quality concrete. ADVA 616 is a tailor-made admixture that helps concrete achieve excellent slump retention for all ranges of design workability. ADVA 616 is very highly effective in enhancing workability and slump retention even in mid-slump concrete and concrete with manufactured sand (crush granite fines), where conventional admixtures have difficulties achieving these properties. ADVA 616 is suitable for a wide range of quality concrete, from low to higher grade concrete, by adjusting addition rate. The use of ADVA superplasticiser can help to provide further water reduction when very low water-cement ratio is needed.

---

Product Advantages :

• Provides long slump life with controlled set times.
• Finishes easily without stickiness, tearing or spotty set characteristics..
• Less susceptible to segregation and bleeding.
• Highly efficient, producing desired slump concrete with no loss in strength.
• Quick and easy application to the concrete mix water for rapid batching.